Home / Marine & Outboards / Outboard Motors

Specification sheet
SKU SH-MAR-0116| Brand | Suzuki |
| Horsepower | 300 HP |
| Engine Type | 55° V6, DOHC 24-valve, 4-stroke |
| Displacement | 4,028 cc (4.0 L) |
| Cylinders | 6 |
| Stroke | 4-stroke |
| Fuel System | Multi-point EFI |
| Controls | Drive-by-Wire (Suzuki Precision Control) |
| Starting | Electric |
| Trim | Power trim & tilt |
| Shaft Length | 25 in (extra-long) |
| Weight | 608 lb |
| Alternator | 54 A |
| Gear Ratio | 2.08:1 |
| Full Throttle RPM | 5,700-6,300 |
| Cooling | Water-cooled |
| Condition | Pre-owned |
Overview
This is a pre-owned 2007 Suzuki DF300 with only 192 documented operating hours, a big-bore four-stroke flagship that pioneered offset-driveshaft V6 design. It is powered by a 4028cc 55-degree V6 with dual overhead cams, 24 valves and multi-point electronic fuel injection, spinning to a 5,700-6,300 rpm range on a 2.08:1 gearcase for strong acceleration and top-end. The engine uses Suzuki Precision Control Drive-by-Wire (DBW) throttle and shift for smooth, precise operation, and a 54-amp alternator supports full electronics loads. This unit is an extra-long 25-inch shaft with power trim and tilt and electric start, and it runs and cools correctly with a low hour count for its age. Weighing roughly 608 pounds, the DF300 is built for offshore center consoles, larger walkarounds and multi-engine transoms. With its clean history and low hours, it is a proven 300-horsepower big-water repower. Inspected and sold with a clean bill of sale; freight-delivered.
Compare similar units
See all →


