Home / Marine & Outboards / Outboard Motors

Specification sheet
SKU SH-FLT-0071| Brand | Evinrude |
| Horsepower | 115 HP (H.O.) |
| Engine Type | 60° V4, E-TEC Direct Injection, 2-stroke |
| Displacement | 1,727 cc (1.7 L) |
| Cylinders | 4 |
| Stroke | 2-stroke |
| Fuel System | E-TEC direct injection |
| Starting | Electric |
| Trim | Power trim & tilt |
| Shaft Length | 25 in (extra-long) |
| Weight | 390 lb |
| Alternator | 133 A total / 50 A net |
| Gear Ratio | 2.00:1 |
| Full Throttle RPM | 5,500-6,000 |
| Cooling | Water-cooled |
| Condition | Pre-owned |
Overview
This is a pre-owned Evinrude E-TEC 115 H.O. outboard, model K115HWXP, from Evinrude's High Output series tuned for extra power and speed. It runs the 60-degree V4 E-TEC direct-injection two-stroke powerhead, displacing 1727cc (105.4 cu in) and pulling hard through a 5,500-6,000 rpm range on a 2.00:1 gearcase. E-TEC's direct-injection combustion delivers a power stroke every revolution for instant throttle response and best-in-class hole shot, while a 133-amp total (50-amp net dedicated) charging system supports demanding electronics. Rigged as an extra-long 25-inch shaft with power trim and tilt and electric start, it suits taller transoms and offshore hulls, and at about 390 pounds it is light for its output. With self-mixing oil, no oil changes and no dealer-scheduled maintenance for the first three years, upkeep is minimal. It is a strong, low-maintenance 115-horsepower repower for center consoles, bay boats and multi-species rigs. Inspected and sold with a clean bill of sale; freight-delivered.
Compare similar units
See all →


