Home / Marine & Outboards / Outboard Motors

Specification sheet
SKU SH-MAR-0026| Brand | Suzuki |
| Horsepower | 60 HP |
| Engine Type | In-line 3-cyl, DOHC 12-valve 4-stroke |
| Displacement | 941 cc (57.4 cu in) |
| Cylinders | 3 |
| Stroke | 4-stroke |
| Fuel System | Multi-point sequential EFI |
| Starting | Electric |
| Trim | Power trim & tilt |
| Shaft Length | 20 in (long) |
| Weight | ~229 lb |
| Alternator | 19 A |
| Cooling | Water-cooled |
| Gear Ratio | 2.27:1 |
| Full Throttle | 5,300-6,300 rpm |
| Condition | Pre-owned |
Overview
This 2017 Suzuki DF60A is a 60 hp four-stroke built on a 941 cc (57.4 cu in) three-cylinder DOHC 12-valve powerhead with multi-point sequential EFI and Lean Burn fuel-saving control, and it shows only 59 operating hours. It is a 20-inch long-shaft unit with power trim and tilt and electric start, offered with either remote controls or a luxury tiller, and it comes complete with remote control, cables and gauge. Suzuki rates it for a 5,300-6,300 rpm full-throttle range through a 2.27:1 gearcase, and its 19-amp alternator supplies strong charging at low rpm for electronics. At roughly 229 lb it is light and compact for a 60, making it an excellent repower for aluminum boats, skiffs, pontoons and small consoles, and this low-hour example is described as running and cooling perfectly. Quiet, smooth and economical, the DF60A is a highly regarded mid-range four-stroke. It is a near-ideal choice for anglers wanting a lightly used, reliable 60. Inspected and sold with a clean bill of sale; freight-delivered.
Compare similar units
See all →


